NO MORE SOCKS & UNDERWEAR THIS HOLIDAY! CLICK HERE TO START YOUR HOLIDAY WISH LIST.

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "wolf tooth"

All-City Pursuit Special
$79.99
The Pursuit Special is All-City's addition to the pantheon of high end track chainrings. They were designed in house by track racers for track racers and are optimized for weight, stiffness, and engagement. These beauties are cnc’d in the USA and utilize a proprietary tooth profile for smooth and quiet operation. The 49-52’s utilize a solid body design with reliefs in the back for weight savings, while the 46-48’s have full cutouts. In sticking with the theme of their aluminum track bike, the Thunderdome, All-City named these rings after Mad Max’s car, the Pursuit Special. - Material: 7000 Series Aluminum - Ring Position/Type: Single
BOX Cosine Chainring
$49.95
- CNC-machined 6061-T6 aluminum with rounded tooth profile to reduce chain wear
Blackspire Snaggletooth Wide Profile Chainring
$56.00
- Wide tooth profiling prevents chain drop without a chainguide - Compatible with 9/10/11 speed chains, allowing a 1x setup on most drivetrains - Constructed in Canada from 7075 aluminum
Campagnolo 11-Speed Indexed Ratchet
$5.90
This is the indexed ratchet needed for converting Campagnolo 11-speed rear derailleurs with a 27-tooth maximum tooth capacity to a 29-tooth maximum tooth capacity to work with 12-29 cassettes.
Campagnolo Cassette Lockring
$39.90 - $55.66
- Fits 2000 and newer Campagnolo wheels - Fits all Fulcrum wheels - Fits 1999 Record/Chorus hubs and all Campy hubs 2000-newer - 27.0mm thread OD 10-speed: - For use with Campagnolo cassettes with 12 to 16 tooth first position cogs - Lockring has a 38.5mm flange diameter 11-speed: - For use only with Campagnolo 11 speed cassettes with 12 tooth first position cogs
Campagnolo Chorus Ultra-Drive 11-Speed Cassette
$195.00
- Optimized 11-speed tooth design for shifting speed and fluidity. Evolved sprocket timing reduces stress on the chain and allows for easier shifting through the higher cogs - Top six cogs are divided into sets of three and are mounted on aluminum carriers. This increases rigidity by 180% and the individual cogs are 70% more resistant to torsion - Cogs are steel with a nickel-chrome treatment - Only compatible with 2015+ mechanical drivetrains and no EPS, due to chain wrap capacity Cassette Body Type: Campagnolo 10/11-speed Cassette Cogs: 11-12-13-14-15-17-19-21-23-26-29 Cassette Spacing: Campagnolo 11-speed Range: 11-29 Weight: 230g
Campagnolo Super Record 12 Speed Sprockets
$395.00 - $410.00
New Super Record 12 Speed sprocket cassettes: innovation which gives the user great advantages, thanks to the matching dimensions and complete compatibility with wheels and frames. The rider has always been Campagnolo’s focus, and the goal has always been facilitating their performance; making the impossible possible. Adding an additional sprocket might seem simple, however, we have not only succeeded in maintaining the same footprint, but also improving the component’s performance and durability, which was a tricky challenge! The new Super Record 12 Speed sprocket sets feature thinner sprockets, tighter spaces and space-saving dimensions that are the same as those of the 11 Speed sprockets, meeting everyone’s needs with just two (11:29; 11:32) cassettes. The addition of the twelfth sprocket allows a linear upshift or downshift by a single tooth, up to the seventh gear, allowing the cyclist to find the perfect ratio for any situation. In addition, the closer sprockets ensure faster, quieter and more precise shifting thanks to the special tooth design and surface treatment which guarantees a longer lifespan. The 6 larger sprockets are also available in two single-piece steel triplets, to avoid energy loss. Mounting the cassettes is easy thanks to matching-thickness spacers.
Chris King R45 Cassette Lockring
$37.00
Designed with today’s taller, double-digit cog stacks in mind, Chris King's R45 cassette lock rings feature longer threads to provide secure engagement with the hub driveshell. A Chris King cassette lock ring is the perfect complement to any Chris King hub, or for anyone looking to add a dash of King performance to other manufacturer’s compatible rear hubs. They are available for both 11 and 12 tooth small cogs, as well as Shimano or Campagnolo hubs.
Chromag Sequence DM Ring
$69.00
The Sequence chainring uses the official X-SYNC technology licensed from SRAM for unmatched chain retention. Chromag is the only MTB company officially authorized to produce chainrings with the X-SYNC technology. So now, no matter what kind of mountain bike you have, you can have the peace of mind that your chain will stay put, and you can give your bike a little extra flair with the timeless Chromag styling. SPECS - Official SRAM X-SYNC technology. Complies with SRAM warranty standards for compatibility with all SRAM X-SYNC drivetrain. - Chamfered mud-clearing recesses at the base of the teeth provide the best possible performance in muddy conditions. - CNC Machined from 7075T6 aluminum for the best durability. - Available for 104/94 BCD crank spider patterns and Direct Mount options. - 7075-T6 aluminum - Anodized Black with laser etch - CNC machined in Whistler, BC. Sequence rings are available in: - 30/32/34/36 tooth (104 BCD) - 28/30 tooth (94 BCD) - 28/30/32 tooth (Direct Mount RFC) - 28/30/32 tooth (Direct Mount GXP) - 28/30 tooth (Direct Mount BB30) - 28/30/32 tooth (Direct Mount Boost) Compatibility Notes: - 104 BCD is the most popular crank arm spacing design (refer to manufacturers specifications to check for compatibility). - Direct mount rings work with SRAM S1400, S2200, S2210, X9 XO and XX1 crank arms. - Direct Mount Sequence rings are available for with GXP and BB30 bottom brackets as well as Race Face Cinch cranks.
Crank Brothers Candy 11 Pedals
$450.00
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Easton Direct Mount Chainring
$74.99 - $94.99
- 7075-T6 aluminum ring for Easton Cinch system Road/CX/Gravel cranks - Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke - Narrow-wide tooth profiling prevents chaindrop with a guide or clutch derailleur - Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool - 47mm chainline with the Easton 129mm spindle - 38T (80g), 40T (91g), 42T (98g), 44T (105g), 46T (112g), 48T (123g), 50T (137g)
Gusset 1'er Steel Cog
$5.95 - $7.95
- Single deep tooth CrMo 3/32" cog for use with HG splined cassette hubs
Gusset MX Chain
$15.95
- The heavy duty little brother of the Badger Pro Singlespeed chain - Grind ready flat-back links are cut-out to reduce weight - Micro-drive compatible with allowing down to 9 tooth cog wrap - Packaged in a round tin box. 395g
Gusset Badger SS-Pro Chain
$39.95
- The ultimate hollow pin Singlespeed chain, superlight and superstrong - Black inner links and white outer links, cut-out to reduce weight - Pins tested at an impressive tensile strength of 1300Kgf - Profiled link plates allow maximum cog wrap (as low as 9 tooth) - Packaged in a round tin box. 325/355g
Gusset Bling Slink Chain
$59.95
- The ultimate in lightweight half link chains, for Singlespeed use only - Hollow link pins and cut-away side plates with amazing tensile strength of 1300Kgf (standard chain is 50kgf) - Maximum wrap profile compatible down to 9 tooth cogs - Packaged in a round tin box. 330/360g
KMC X11.93 Chain
$30.00
Solid pins, inner and outer plates make for an economical chain choice with all the performance of higher level KMC X-Series chains. - Includes KMC Missing Link 11 - Optimized chamfer angles for superior stability in extreme chainlines - Upgraded outer plate chamfering for minimized cassette tooth interference - Double X-Bridge structure technology for improved shifting performance - Mushroomed Pin Riveted - Compatible with Shimano, SRAM & Campagnolo 11 Speed Systems
Origin8 Thruster 104mm BCD 1x Chainring
$32.99 - $33.99
Origin8's Thruster 104mm BCD 4-bolt chainrings are great for MTB, Boost, and Fat applications. Their Narrow/Wide tooth design provides chain retention on 1x systems, and they are 10, 11, or 12 speed compatible. - Forged and hard anodized AL6061-T6 alloy construction - BCD: 104mm 4-Bolt - Type: 1x - Chain Compatibility: 10/11/12s - Tooth Type: Narrow/Wide
Origin8 Thruster Direct 1x Boost/Fat Chainring
$33.99 - $35.99
- Boost/Fat direct mount chainrings - Narrow/Wide tooth design for chain retention on 1x systems - 10, 11, or 12 speed compatible - Forged and hard anodized AL6061-T6 alloy construction - SRAM 3-bolt interface for crank arm mounting - BCD: Direct Mount - Type: 1x - Material: AL6061 - Chain Compatibility: 10/11/12s - Offset: 3mm
Origin8 Thruster Direct 1x MTB Chainring
$33.99 - $35.99
- MTB direct mount chainrings - Narrow/Wide tooth design for chain retention on 1x systems - 10, 11, or 12 speed compatible - Forged and hard anodized AL6061-T6 alloy construction - SRAM 3-bolt interface for crank arm mounting - BCD: Direct Mount - Type: 1x - Spec: GXP - Chain Compatibility: 10/11/12s Tooth - Type: Narrow/Wide - Offset: 6mm
Origin8 Thruster 64/104mm BCD Chainring Set
$35.99 - $39.99
- 64/104mm BCD 4-bolt chainring sets for MTB, Boost, and Fat applications - Shifting ramps and stainless steel pins for smooth shifting - 10 or 11 speed compatible - Stamped AL2014-T6 alloy construction - BCD: 64/104mm 4-Bolt - Type: 2x - Tooth Type: Standard
Origin8 Thruster 110mm BCD 1x Chainring
$39.99 - $41.99
Origin8's Thruster 110mm BCD 5-bolt chainrings are great for road, 'cross, and gravel applications. Their Narrow/Wide tooth design offers outstanding chain retention on 1x systems, and they're 10 or 11 speed compatible. - Forged and hard anodized AL6061-T6 alloy construction - BCD: 110mm 5-Bolt - Type: 1x - Chain Compatibility: 10/11s - Tooth Type: Narrow/Wide
Origin8 Holdfast 1x Chainring
$51.99 - $65.99
Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
Origin8 Holdfast Oval 1x Chainring
$53.99 - $71.99
Narrow/Wide tooth design for chain retention on 1x systems - Oval shape for increased power and efficiency - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy - 4 bolt
Origin8 Thruster 110mm BCD Chainring Set
$53.99 - $55.99
Origin8's Thruster 110mm BCD 5-bolt chainring sets are great for road, 'cross, and gravel applications. Shifting ramps and stainless steel pins deliver smooth shifting, and these rings are 10 or 11 speed compatible. - Stamped AL2014-T6 alloy construction - BCD: 110mm 5-Bolt - Type: 2x - Chain Compatibility: 10/11s - Tooth Type: Standard
Origin8 Holdfast Direct 1x Chainring
$69.99 - $73.99
Narrow/Wide tooth design for chain retention on 1x systems - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
Origin8 Holdfast Oval Direct 1x Chainring
$75.99 - $77.99
Narrow/Wide tooth design for chain retention on 1x systems - Oval shape for increased power and efficiency - 10 or 11 speed compatible - Mud clearing channels - CNC 7075 Swiss Alloy
Origin8 Track/SS 3/32-inch Crankset
$79.99
- Single speed crankset - Forged AL6061-T6 alloy crankarms - Includes 46 tooth alloy 3/32" chainring - 42mm chainline with 103mm JIS BB - BCD: 130mm - Weight: 620g - Does not include JIS square taper BB
Origin8 Track/SS Crankset
$79.99
Origin-8's Track/SS Crankset is made of light and durable forged aluminum. It has a fine machined-aluminum 46-tooth chainring for super-smooth pedaling and comes in a variety of colors to make your bike the coolest ride on the block. - Single speed crankset - Forged AL6061-T6 alloy crankarms - CNC alloy 1/8" 46 tooth chainring - 42mm chainline with 103mm JIS BB
Origin8 Trackstar Crankset
$79.99
Origin-8's Trackstar Crankset is made of light and durable forged aluminum and features a stylish machined-aluminum 46-tooth 1/8-inch chainring for excellent power transfer on the road and track. - Single speed crankset - Forged AL6061-T6 alloy crankarms - CNC alloy 1/8" 46 tooth chainring - 42mm chainline with 103mm JIS BB
Park Tool Bottom Bracket Tool (20-Spline)
$13.49
Park's BBT-32 is the perfect solution for the home mechanic installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-32 utilizes a flat tooth profile to ensure maximum engagement with the bottom bracket cup and features 32mm wrench flats.
Page 1 of 5 Next page