Tools/Maintenance

The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products. - Tire studs sold separately - POM-injected handle - Stainless steel barrel - Thumb and index finger grips for more comfort and control - Compatible with studs that have a 3.5mm or smaller shaft

Designed to fit snugly between the disc brake caliper pistons or pads, preventing inward pad movement to preserve hydraulic brake adjustment while the wheel is off the bike.. - For disc caliper repair - Fits SRAM Guide, Trail, and Avid Code Brakes

Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.

Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.

Essential parts to properly service and maintain all Avid CODE brakes. - Replacement parts for 2007-2010 CODE brakes - Includes bearings, bearing press tool, pivot bolt, cam, cam spring, and lever

Can you tell the difference between 15psi and 17psi? No you can't. We can't either, but Blakburn's digital gauge can. Today's wider, lower pressure tires are more pressure-critical than back when we just used to put as much pressure in as the pump could stand. It's not about fending off flats these days, it's about grip. And the difference between too much and not enough can be as little as a couple of pounds of pressure. The days of "giving it a squeeze" are over. - Swivel/Dual Head - Backlit Display - Accurate within 1% of pressure - Rated from 1-150 PSI - Key Chain Loop - 0.30lbs

Brooks' Proofide Saddle Dressing shortens the break-in period of a new saddle. It's specially formulated from natural ingredients to preserve and condition the leather, keeping it supple and shower-proof for the life of the saddle.

Low viscosity mineral oil for use with Campagnolo hydraulic brake systems. - Does not absorb water so regular bleeding is not necessary - Non-toxic and will not irritate skin - Will not damage frame finishes

- Mineral Oil for Campagnolo hydraulic disc brakes

Campagnolo UT-CN400 Chain Tool. - Used to install 12-speed and 13-speed Campagnolo chains

- 11 speed compatible - Allows removal, installation and peening of rivets

When you are installing headset cups into your bicycle frame or a crown race onto your fork, there is only one way to get the job done right. Use an appropriately-sized Cane Creek installation tool, or risk damaging your frame and/or fork. The headset cup installation tools are designed to be used with a headset press, sold separately.

Service kit for Cane Creek suspension forks.

Chris King Blue Grease is a resilient lubricant optimized for headsets and as a general assembly compound. Viscous and tacky, Blue Grease is an ideal headset bearing lubricant and assembly compound, engineered to withstand extreme riding conditions. Compatible with steel and ceramic bearings.

Engineered for high performance at all temperatures and less rolling resistance. - The only recommended grease for King hubs

Service tools to ensure long-term success of Chris King hubs. - For use in bearing preload adjustments on all Chris King front and rear hubs

Service tools to ensure long-term success of Chris King hubs. - For intensive servicing of Ringdrive system found in most Chris King rear hubs - Included: Hub Cone Adjusting Tool, Cog Spline Wrench, Spline Driver, Driveshell Bushing Tool, and Service Manual - Does not fit R-45 model hubs. See TL7829 for proper tool fitting R-45 hubs

The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g

Tubeless tire plug kit plus CO2 head. - Tire plug tool - Tire plugs - CO2 head - Storage case - Mounting bracket - 5 year warranty

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m17 includes: Chain tool: 8/9/10 speed compatible Spoke wrench: #0, 1, 2, 3 Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Open wrench: 8mm, 10mm Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 168g Warranty: Lifetime

The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m19 includes: - Chain tool: 8/9/10 speed compatible - Spoke wrench: #0, 1, 2, 3 - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Open wrench: 8mm, 10mm - Screwdrivers: Phillips #1, Phillips #2, flat #2 - Torx: t-10, t-25 - Stainless steel carrying case - Length: 89 mm - Weight: 175g - Warranty: lifetime

The ultimate trail-side companion. Details - 20 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Chain Tool: 8/9/10/11/12 speed compatible - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Open Wrench: 8mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener - Spoke Wrench: #0, 1, 2 - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 203g

- 11 different tools housed in a composite storage case - Plug tool and plugs - 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches - Torx T25 - Phillips #1 & flat screwdrivers - Bottle opener

- 16 different tools housed in a composite storage case - Plug tool and plugs - Case features an 8-12sp chain tool and doubles as a handle for extra leverage - 2, 2.5, 3, 4, 5, 6, 8mm hex wrenches - Torx T25 - Phillips #1 & flat screwdrivers - #0, 1, 2 & 3 spoke wrenches - Bottle opener

The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel. - Rubberized ergonomic handle - Unique "thumb flange" makes it easy to apply pressure to the tire bead - Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims - Lifetime warranty

The Ultimate Tire Lever. The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts. Especially the critical step of dropping the bead into the rim channel. Rubberized ergonomic handle – the most comfortable tire lever you’ll ever use Unique “thumb flange” makes it easy to apply pressure to the tire bead Sturdy, durable plastic lever – strong enough for DH tires, yet won’t scratch your rims

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Multi-tool for DT aero spokes, torx, and square nipples

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - Works with Torx-style nipples found on DT Swiss Tricon Wheels - This professional tool is designed for a precise fit and prevents rounding of nipples - Metal nipple interface contacts torx nipple on all surfaces

DT Swiss spoke wrenches for repairing all types of DT Swiss wheels. - This professional tool is designed for precise fit and prevents rounding of nipples - Metal nipple interface contacts nipple on all four surfaces - Fits 3.25mm square nipple interface

Tools for working with DT Swiss spokes. - Punch with concave head - Improves seating of the spoke head in the hub flange