Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Your Search: "industry nine"

$49.95
Sharing the same versatile tread pattern as the Kwick Nine and the Kranium, the Kwick Seven.5 takes advantage of the intermediate sized wheel on 27.5" (650B) bicycles so you can ride the streets as efficiently as you do off road. Featuring K-Shield (KS) protection for puncture resistance and a reflective sidewall for better urban visibility, the Kwick Seven.5 is ready for your urban adventures. - Premium Trekking, Comfort, or Commuting tire - Front and Rear application - K-Shield (KS) is a layer of light, flexible rubber containing aramid and ceramic particles inside the tire under the tread area only. Designed to prevent punctures and increase tire life - Reflective stripe on sidewalls for added safety
$9.95
Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.
$13.95
Ever wish your cable was longer so that you could lock up your bike and accessories? The Akita Cable has loops on each end allowing it to act as an extension for any other lock. These cables are made from some of the thickest, toughest and most flexible steel in the industry, so you can lock up anything you want and walk away with peace of mind.
$199.99
The Starter Tool Kit 1.1 is designed for the aspiring mechanic looking to get started with the right tools and room to grow. The kit starts with our Burrito Tool Wrap. This versatile wrap keeps your tools organized and protected in a durable, ultra-portable design with twenty pockets, waterproof exterior, and space for tools up to 13.75 inches (350mm) in length. Next we fill the Burrito with the essential tools needed by every mechanic. Finally, we round things out by leaving nine extra spots to add tools as you learn new skills and tackle new challenges. Includes: - 7pc L Hex Set w/ Holder: 1.5, 2, 2.5, 3, 4, 5, and 6mm hex sizes. - 8mm L Hex - Tire Lever Pair - Yellow - Cassette Lockring Socket - Phillips #2 Screwdriver - Flat 5.5mm Screwdriver - Pro Travel Pedal Wrench w/ 24mm Socket Driver - Six-Pack Chain Tool with Spoke Wrenches (3.2, 3.3 and 3.5mm) - Cable Cutter - Pro Chain Whip with Integrated Fixed Gear Lockring Wrench - Toothbrush
$49.90
- The Cycl-e DT and DTs are developed for urban and commuting use, where rolling efficiency, reliability and maximum grip on any surface and on any condition are essential. - Outperforms on safety and built to match rolling and puncture protection industry standard - Cap & base tread construction guarantees grip and rolling on the outer rubber, and protection and reliability on the inner - Solid multi-ply overlapping casing structure - ECE-R75 compliant - Best in class wet grip
$49.90
- The Cycl-e DT and DTs are developed for urban and commuting use, where rolling efficiency, reliability and maximum grip on any surface and on any condition are essential. - Outperforms on safety and built to match rolling and puncture protection industry standard - Cap & base tread construction guarantees grip and rolling on the outer rubber, and protection and reliability on the inner - Solid multi-ply overlapping casing structure - -15% rolling resistance versus the non-sport version - ECE-R75 compliant - Best in class wet grip
$49.90
- The Cycl-e GT is a tire developed to enhance the dynamic characteristics of the modern riding style, whether it is taken in the city or in the twisty roads of the countryside: That's where Pirelli's famous 2-wheels expertize shines. - Motorbike derived profile and tread design for superior handling - Outperforms on safety and built to match rolling and puncture protection industry standard - Cap & base tread construction guarantees grip and rolling on the outer rubber, and protection and reliability on the inner - Solid multi-ply overlapping casing structure - ECE-R75 compliant - Best in class wet grip
$35.00
This simple logo hat is a great way to keep the sun out of your eyes at outdoor industry events or cover up a bad case of helmet hair. - One Size - Adjustable
$179.99
- Deep pocket forged and CNC machined to optimize strength and stiffness while shaving every ounce of uncessary weight - Industry standard 30mm spline interface - Incredibly stiff and responsive - CNC machined 7050 alloy - 30 years of refined design - Chainring sold separately
$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
$249.99
- Internal Routed, Infinitely Adjustable Design - Simplistic - Fully Sealed Alloy Cage / Stainless Tip Cartridge System - Durable 3D Forged Head - With 7075-T6 Forged Clamp - Featherlight Thumb Actuation - Industry Leading - Intelligent Keyway System - Ensures Minimal Play - Easiest Installation - Cable Head Attaches At Base - Cold Weather Approved - Tested Down To -20C. - 1x Lever included - With Premium Jagwire Lex Slick Housing, Stainless Cable and Hardware
$30.99
The Dual cage combines recycled carbon fibers from the automotive industry and impact-resistance polyamide. The material, named POLYCARBON, has strong advantages: the high carbon content of the bottle cage makes it especially light, yet at the same time it guarantees a high degree of stability.
$16.00
The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace
$32.00
SRAM's NX trigger shifter with X-ACTUATION technology gives you sharp, dependable shifting. Built for precise and swift shifting across SRAM's wide range 11-speed cassette, the NX trigger shifter brings industry changing technology to everyone. - X-ACTUATION for precise and dependable 11-speed performance - Fully compatible with all SRAM 1x drivetrains - Weight: 142 grams - Speeds: 1 x 11 - Colors: Black
$39.00
SRAM NX Grip Shift with X-ACTUATION™ technology gives you sharp, dependable shifting. Built for precise and swift shifting across our wide range 11-speed cassette, the NX Grip Shift brings industry changing technology to everyone. - SRAM 1x™ X-ACTUATION™ for precise and dependable 11-speed performance - SPEED METAL™ shift indexing - ROLLING THUNDER™ ball bearing technology - JAWS™ lock-on grip technology
Shimano's Deore XT Ice-Tech rotors utilize the industry standard 6-bolt mounting system for secure mounting. These rotors use an aluminum core with steel outer plates to better control the temperature of the braking surface. This means quieter braking and, more importantly, less fade on long downhills and improved pad life. The various sizes give you total freedom of choice over the delicate balance of power versus weight.
$44.99
Modern-looking performance tire The industry standard in performance training tires is back with a refreshed design, and increased performance! The subtle center grooves and shoulder texture retain the secure feel of the Zaffiros of the past, while streamlining the look and feel for the future. The alternating slick profile and Graphene compound mimic the feel of the Zaffiro’s higher-end siblings, while adding durability, and a more approachable price point.
$44.99
The industry standard in performance training tires is back with a refreshed design and increased performance! The subtle center grooves and shoulder texture retain the secure feel of the Zaffiros of the past while streamlining the look and feel for the future. The alternating slick profile and Graphene compound mimic the feel of the Zaffiro's higher-end siblings while adding durability and a more approachable price point. - Extremely durable tires for performance training - Graphene 2.0 compound and folding bead increase performance - Modern tread design for long-lasting durability
$39.95
Boostinator kits allow non-boost wheels to be mounted in Boost spacing frames and forks. While incremental, the benefits of the "Boost" 15x110mm front and 12x148mm rear axle standards are clear: better clearance for fatter tires & rims and reduced dish for stiffer, stronger wheels. The big bummer? Taking full advantage requires not only a new frame and fork, but new wheels as well. In response, we have developed the Boostinator. When paired with compatible 15x100mm or 12x142mm hubs, Boostinator kits allow existing wheels to be mounted in Boost-standard frames and forks. Disc and drivetrain positions are maintained and, thanks to a quick re-dish, spoke bracing angles are improved. Boostinator kits consist of a specially-designed axle end cap and, in the case of rear kits, a precision-machined rotor spacer with a set of six high-strength bolts. In keeping with Boost specifications, the disc and cassette are shifted outboard, allowing brakes and derailleurs to function as designed. Compatibility: - Front boostinators are only an endcap and do not require a rotor spacer. The wheel is re-dished. - Rear boostinators require both a re-dish and rotor spacer. - Rear Boostinator kits are not approved for rotors larger than 183mm. - Hubs spacing is 100mm front and 142 rear, and the Boostinators make them 110 and 148 respectively. - Compatible with 6-bolt FRONT wheels and SOME centerlock models. - Compatible with ONLY 6-bolt REAR wheels (there is no way to space centerlock rotors over 6mm). - NOT recommend (or safe) for non-symmetric lacing like the 2:1 lacing found on some of Industry Nine's wheels. *Note: You will need to re-dish your wheel after installing any Boosinator. Boostinator DR: - The Boostinator DR is compatible with DT-Swiss 12x142mm Star Ratchet (240- and 350-series) rear hubs with 6-bolt (IS) rotor mounts. - Centerlock hubs are not supported. - 180- and 190-series hubs are Centerlock only. - The Boostinator DR is also compatible with some complete wheels from DT Swiss, Roval (Specialized), Giant, Syncros (Scott), and others that use DT's Star Ratchet internals. - Remove the disc side end cap. Bearing size 6802 15x24. - Net weight: 18g Boostinator HR: - The Boostinator HR is compatible with 12x142mm Hope Pro 2 EVO and Pro 4 rear hubs. - Non-EVO Pro 2 hubs are not supported - Net weight: 18g Boostinator 9TR: - Compatible with 142x12 rear Industry Nine Torch hubs. - Not compatible with 2:1 lacing wheels from Industry Nine - Not compatible with Centerlock hubs Tech Specs: - Material: 6061 aluminum - Included: Rear kits come with appropriate-length Class 10.9 bolts, each roughly 40% stronger than more common Class 8.8 hardware.
$23.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
Previous page Page 2 of 2